Method For Operating Keypad - SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. enc eds800-2s0002n User Manual

Set frequency
Switch display
Waiting status parameter
Display or run status
parameter display or
failure alarm display
(5) Special display function
You can change set frequency under supervision state directly when keypad
potentiometer is effective (F0.00=0) or keypad digital setting is effective (F0.00=1).
Here the inverter displays set frequency if it's stop or displays output frequency if
it's running. After set frequency stops changing for 1 second the inverter will go
back to normal display status.

4.2.5 Method for operating keypad

Can carry on various operation to the inverter through keypad，for example:
(1) status parameter display switching:
After pressing key
displaying one supervision parameter code for 1 second, will display this parameter
value automatically.
LED displayed
content
Key
Set frequency
operation
order
Fig. 4-6 waiting status parameter display operating example
Description:
1> All status parameters C-00～C-14 can be displayed when the inverter leaves
factory. You can make a change by modifying function code F2.11, F2.12 if you
want to, for detail please refer to F2.11, F2.12function code description.
2> Can press
directly when the user see about status supervision parameter.
EDS800 series Service Manual
first-class
MENU
menu
run parameter
MENU
Fig.4-5 keypad display status switching
，display C group status supervision parameter; after
SHIFT
50.00 C-01
Output frequency
SHIFT
1s
para. value
Pulse input
SHIFT
ENTER
key to switch into constant supervision C-01 display status
DATA
Second-class
ENTER
menu
Frequency
setting mode
MENU
ENTER/DATA store para.
Editing status
1s
C-02
para. value
SHIFT
C-14
para. value
∫...∫
SHIFT
30
third-class
ENTER
menu
Digital provision
MENU/ESC
1s
para. value
Output current
1s
C-03
Output voltage
SHIFT