Code And Manufacturer Function Parameter: Ff - SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. enc eds800-2s0002n User Manual

6.12 Code and manufacturer function parameter: FF

FF.00 user password
User password setting function is used for prohibiting unauthorized personnel
from consulting and modifying function parameter.
Set this function code to 0000 when user password function isn't wanted.
First input 4 bits number as user password and press
the password will come into effect at once.
Password modification:
Enter into password verification state by pressing
primary 4 bits password parameter editing state is available，choose FF.00(here
FF.00=0000)，input new password and press
password come into effect at once.
Please keep the password you set without fail, in case the password is missing please
consult the manufacturer.
note
FF.01 manufacturer password
Setting function for the manufacturer, user need not modify it.
EDS800 series Service Manual
Range： 0000－9999
Range：0000－9999
102
ENTER
key to confirm, then
DATA
ESC
key, after inputting
MENU
ENTER
key to confirm，then the
DATA
0000
0000