Returning The Server To Operation; Install The Server Top Cover - Oracle Exadata X5-2 Service Manual

Returning the Server to Operation

After replacing components inside of the server, perform the procedures in the following
sections.
Description

Install the server top cover.

Install the fan door assembly top cover.
Remove any antistatic measures.
Reinstall the server chassis in the rack.
Return the server to the normal rack position.
Reconnect power and data cables.
Power on the server.
Related Information
"Preparing for Service" on page 47
■
Install the Server Top Cover
1. Place the top cover on the chassis.
Set the cover down so that it hangs over the rear of the server by about 1 inch (25 mm) and the
side latches align with the cutouts in the chassis.
2. Check both sides of the chassis to ensure that the top cover is fully down and
flush with the chassis.
If the cover is not fully down and flush with the chassis, slide the cover towards the rear of the
chassis to position the cover in the correct position.
Links
"Install the Server Top Cover" on page 161
"Install the Fan Assembly Door" on page 163
"Remove Antistatic Measures" on page 164
"Reinstall the Server in the Rack" on page 164
"Return the Server to the Normal Rack
Position" on page 165
"Reconnect Power and Data Cables" on page 167
"Power On the Server" on page 167
Returning the Server to Operation 161