8T - 4
POWER MIRRORS
BR
Fig. 10 Power Mirror Switch
Connector
(15) Install door panel attaching screws.
POWER MIRROR REMOVE/INSTALL
(1) Remove door trim panel as described in Power
Mirror Switch Remove/Install.
(2) Unplug mirror motor connector (fig. 11).
(3) Remove 3 nuts holding mirror to door.
(4) Reverse removal procedures to install.
Fig. 11 Power Mirror
Remove/Install
AUTOMATIC DAY/NIGHT MIRROR REMOVE/
INSTALL
(1) If so equipped, remove wire cover by grasping
lower portion of wire cover and sliding into upper
portion and off of mirror base (Fig. 12).
ON/OFF
ELECTRICAL
SWITCH
CONNECTOR
Fig. 12 Automatic Day/Night Mirror
Remove/Install
(2) Unplug connector behind mirror.
(3) Remove screw holding mirror to windshield.
(4) Push mirror up far enough to clear the support
and remove mirror.
(5) Reverse removal procedures to install.