Dodge RAM TRUCK 1500 1995 Service Manual page 483

S I -10 WIPER AND WASHER SYSTEMS — B R
HOSE CLAMP
TOOL 6094
HOSE
CLAMP
RADIATOR
J9207-36
Fig. 21 Hose Clamp Tool - Typical
TYPICAL
CONSTANT
TENSION HOSE
CLAMP
TYPICAL
HOSE
CLAMP
NUMBER/LETTER
LOCATION
J9407-39
Fig. 22 Clamp Number/Letter Location
(5) Gently pry pump and/or sensor away from res­
ervoir and out of grommet. Care must be taken not
to puncture reservoir.
FAN
SHROUD
WASHER FLUID
RESERVOIR
UPPER RADIATOR
HOSE J948K-11
Fig. 23 Upper Radiator Hose Remove/Install
FAN
SHROUD
WASHER
RESERVOIR
LOW WASHER FLUID
SENSOR
WASHER PUMP
J948K-18
Fig. 24 Washer Fluid Reservoir Remove/Install
(6) Remove rubber grommet(s) from reservoir and
throw away.
(7) Reverse removal procedures to install. Install
new grommets in reservoir for pump and/or sensor.
Refer to Group 7 - Cooling System for instructions on
refilling engine coolant.