Do you have a question about the RAM TRUCK 1500 1995 and is the answer not in the manual?
Questions and answers
brian
May 12, 2025
wiring diagrams windows aqnde door locks
1 comments:
Mr. Anderson
May 20, 2025
The wiring diagrams for the windows and door locks of a 1995 Dodge Truck 1500 include the following components and circuits:
1. Power Window System: - The window motor is connected through circuits like C326, C32S, and uses colored wires (e.g., 14BR, 14BR/WT, 14VT/WT, 14VT). - The right power window switch is labeled J958W-9 BR, and controls UP and DOWN functions. - The wire harness connects to the regulator and switch panel.
2. Power Door Locks: - Power is supplied from a 50-amp fuse in the Power Distribution Center to the fuse block. - Fuse 19 supplies battery voltage on the F35 circuit to both door lock switches. - Right door switch: - LOCK position sends voltage through the P33 circuit to the door lock motors. - Ground returns via the P34 circuit, through the switch’s internal bus bar to P36, then to the left door switch and finally to ground on circuit Z3. - Left door switch also connects to circuit Z3 for system grounding.
Each switch and component is shown in its rest position (doors closed, key off), and connector and splice locations are detailed in other sections like 8W-70 (splices), 8W-80 (connectors), and 8W-90 (connector illustrations).
Need help?
Do you have a question about the RAM TRUCK 1500 1995 and is the answer not in the manual?
Questions and answers
wiring diagrams windows aqnde door locks
The wiring diagrams for the windows and door locks of a 1995 Dodge Truck 1500 include the following components and circuits:
1. Power Window System:
- The window motor is connected through circuits like C326, C32S, and uses colored wires (e.g., 14BR, 14BR/WT, 14VT/WT, 14VT).
- The right power window switch is labeled J958W-9 BR, and controls UP and DOWN functions.
- The wire harness connects to the regulator and switch panel.
2. Power Door Locks:
- Power is supplied from a 50-amp fuse in the Power Distribution Center to the fuse block.
- Fuse 19 supplies battery voltage on the F35 circuit to both door lock switches.
- Right door switch:
- LOCK position sends voltage through the P33 circuit to the door lock motors.
- Ground returns via the P34 circuit, through the switch’s internal bus bar to P36, then to the left door switch and finally to ground on circuit Z3.
- Left door switch also connects to circuit Z3 for system grounding.
Each switch and component is shown in its rest position (doors closed, key off), and connector and splice locations are detailed in other sections like 8W-70 (splices), 8W-80 (connectors), and 8W-90 (connector illustrations).
This answer is automatically generated