Dodge RAM TRUCK 1500 1995 Service Manual page 330

7 - 81 ENGINE ACCESSORY DRIVE BELTS
B R
CAUTION: To prevent damage to coll case, coil
mounting bolts must be torqued.
(5) Install drive belt. Refer to Belt Removal/Instal­
lation in this group.
(6) Check belt indexing marks (Fig. 13).
S.BL HDC-GAS AMD 8.0L ¥-10 ENGINES
IEiOWAL
(1) Remove accessory drive belt. Refer to Belt Re­
moval/Installation in this group.
(2) Remove tensioner mounting bolt (Fig. 11) and
remove tensioner.
CAUTION: If the pulley is to be removed from the
tensioner, its mounting bolt has left-hand threads.
WARNING: B E C A U S E OF HIGH S P R I N G P R E S ­
S U R E , DO NOT ATTEMPT TO D I S A S S E M B L E AUTO­
MATIC TENSIONER. UNIT IS SERVICED AS AN
A S S E M B L Y ( E X C E P T FOR P U L L E Y ) .
INSTALLATION
(1) Install pulley and pulley bolt to tensioner (ob­
serve the previous CAUTION). Tighten bolt to 88
N-m (65 ft. lbs.) torque.
(2) Install tensioner assembly to mounting bracket.
A dowel pin is located on back of tensioner (Fig. 14).
Align this to dowel hole (Fig. 15) in tensioner mount­
ing bracket. Tighten bolt to 41 N-m (30 ft. lbs.)
torque.
(3) Install drive belt. Refer to Belt Removal/Instal­
lation in this group.
5.9L DIESEL ENGINE
iEiOWAL
(1) Remove accessory drive belt. Refer to Belt Re­
moval/Installation in this group.
(2) Remove tensioner mounting bolt (Fig. 12) and
remove tensioner.
WARNING: B E C A U S E OF HIGH S P R I N G P R E S ­
S U R E , DO NOT ATTEMPT TO D I S A S S E M B L E AUTO­
MATIC TENSIONER. UNIT IS S E R V I C E D AS AM
A S S E M B L Y ( E X C E P T FOR P U L L E Y ) .
BELT TENSIONER
DOWEL PIN J9307-<
Fig. 14 Tensioner Dowel Pin—5.9L HDC-Gas and
8.0L V-10 Engines
Fig. 15 Tensioner Dowel Hole—5.9L HDC-Gas and
8.0L V-10 Engines
INSTALLATION
(1) Install pulley to tensioner.
(2) Install tensioner assembly to mounting bracket.
A dowel is located on back of tensioner. Align this
dowel to hole in tensioner mounting bracket. Tighten
bolt to 41 N-m (30 ft. lbs.) torque.
(3) Install drive belt. Refer to Belt Removal/Instal­
lation in this group.