Dodge RAM TRUCK 1500 1995 Service Manual page 951

BR
DRIFT 9209-41
— - 5 J L ENGINE 9 -107
INSTALLATION
(1) Coat edges of plug and core hole with Mopar®
Gasket Maker, or equivalent.
CAUTION: DO NOT drive cup plug into the casting
as restricted coolant flow can result and cause se­
n-lays engine problems.
(2) Using proper plug driver, drive cup plug into
hole. The sharp edge of the plug should be at least
0.50 mm (0.020 inch) inside the lead-in chamfer.
It is not necessary to wait for curing of the sealant.
The cooling system can be filled and the vehicle
placed in service immediately.
ASSEMBLE
(1) Install the piston/connecting rod assembly.
(2) Install the oil pan.
(3) Install the cylinder head.
(4) Install the engine into the vehicle.
Fig. 13 Core Hole Plug Removal