Dodge RAM TRUCK 1500 1995 Service Manual page 158

3 - 38 REAR SUSPENSION AND AXLE
Fig. 37 Pinion Gear Depth Measurement
• Model • 60 and 70: Installer D-lll and • Handle
c-4171 :
• Model 80: Installer C-4204 and Handle C-4171
INSTALLER
HANDLE J9402-66
Fig. 38 Pinion Rear Bearing Cup instaiiation
(10) Install rear bearing (and slinger if used) on
pinion gear (Fig. 39);
• Model 60: Installer C-3095A
• Model 70 and 80: Installer D-389
(11) Assemble preload shims or collapsible spacer
if used onto pinion and install pinion gear in hous­
ing.
(12) Install pinion front bearing and oil slinger.
(13) Apply a light coating of gear lubricant on the
lip of pinion seal. Install the new seal with;
• Model 60 and 70: Installer D-163 and Handle
C-4735
• Model 80: Installer D-187B
Fig. 39 Pinion Rear Bearing Installation
(14) Install yoke, washer and nut (Fig. 40).Model
60 and 70 install washer with concave surface
against the yoke. Install the yoke with;
• Model 60 and 70: Installer C-3716 and Holder
6719
• Model 80: Installer D-191 and Holder 6719
YOKE
J9402-61
Fig. 40 Pinion Yoke Installation
(15) Tighten the yoke nut (Fig. 41) to;