8C-6
OVERHEAD CONSOLE
B R
COMPASS/THERMOMETER MODULE REMOVE/
INSTALL
(1) Remove overhead console and unplug wiring.
See Overhead Console Remove/Install.
(2) Remove 3 screws holding module to console
(Fig. 7).
Fig. 7 Compass/Thermometer Module Remove/
Install
(3) Unplug harness connector from lighting module
(Fig. 8).
(4) Remove compass module.
(5) Reverse removal procedures to install.
READING/COURTESY LAMPS
LENS OB BULB
REMOVE/INSTALL
(1) Insert a long flat-bladed tool at the notch on
the curved edge of the lens. Carefully pry the lens
from the housing and pivot the lens down. It may be
necessary to move the tool along the edge to free the
lens.
Fig. 8 Lighting Harness
Connector
(2) Remove bulb by pulling straight down.
(3) Install new bulb by pushing firmly into socket.
(4) Pivot lens up into position and snap into place.
Test by depressing lens to check for proper switching
and lighting.