Dodge RAM TRUCK 1500 1995 Service Manual page 516

B R
POWER WINDOWS 8S - 3
S E R V I C E P R O C E D U R E S
POWER WINDOW SWITCH REMOWE/INSTALL
(1) Remove 2 screws and door pull cup (Fig. 3).
REMOVE 2 SCREWS
J948S-2
Fig. 8 Door Pull Cup
(2) Remove power window/lock switch by reaching
through door pull cup opening and depressing rear
switch retaining tab (Fig. 4).
Fig. 4 Switch Bezei Rear Retaining Tab
(3) Pull rear of switch up and away from door.
(4) Unplug connectors from switch (Fig. 5).
TABS FRONT CLIP J948S-8
Fig. 5 Door Switch Connectors
(5) Plug connector onto new switch.
(6) Install a new switch by inserting front of
switch into trim panel then pushing down rear of
switch.
POWER WINDOW MOTOR REMOVE/INSTALL
To repair or inspect the entire electric window reg­
ulator, remove from door as follows:
(1) Remove switch as described in Power Window
Switch Remove/Install.
(2) If equipped, pull power mirror switch control
knob rearward to remove from switch (Fig. 6).
Fig. 6 Power Mirror Knob Remove/lnstali
(3) Remove switch retaining nut from switch (Fig.
7).
SWITCH RETAINING / / \
Fig. 7 Power Mirror Switch Nut