B R
AUDIO SYSTEMS
. 8F - 1
(2) Remove 2 screws holding bottom of RWAL-mod
ule bracket to instrument panel brace (Fig. 16).
Fig. 16 RWAL Module Lower Mounting
(3) Remove screw holding top of RWAL module
bracket to instrument panel (Fig. 17) and remove
module.
Fig. 17 RWAL Module Upper Mounting
(4) Remove 2 screws and relay/choke assembly
(Fig. 18).
Fig. 18 Relay/Choke
Assembly
(5) Reverse removal procedures to install.
ANTENNA REMOVE/INSTALL
(1) Disconnect battery negative cable.
(2) Remove 5 screws holding right side kick panel/
sill trim. Remove kick panel/sill trim.
(3) Remove antenna mast from antenna body (Fig.
19).
Fig. 19 Antenna Mast Remove/install