I R
ALL-WHEEL ANTILOCK BRAKE SYSTEM (ABS)
5 - 47
(10) Check and top off master cylinder reservoir
fluid level. Then verify proper brake operation before
moving vehicle.
(11) Repeat bleeding procedure if either brake
warning light illuminates, or if pedal is still spongy.
BLEED
VALVE
STEM
Fig. 24 Location
Of Front Antilock
Valve Bleed
Valve
Stern And
Plug
Vacuum Brake Bleeding
If vacuum bleeding equipment is used, no special
precautions are required. Just bleed the brakes in ac
cordance with the equipment manufacturers instruc
tions.
Fig. 25 Front Antilock Valve Bleed
Tool Installation
Pressure Heeding
If pressure bleeding equipment will be used, the
metering valve stem in the combination valve must
be either pressed inward, or held outward slightly in
order to bleed front brakes. The stem can be held
open, or pressed inward with a tension clip tool, or
by hand.
Follow the bleed equipment manufacturers instruc
tions for use. Also do not pressure bleed without a
proper adapter for the master cylinder reservoir.