80 -14
IGNITION SYSTEMS
BH
OHMMETER
MAKE OHMMETER
CONNECTIONS AT
CORRESPONDING CYLINDERS
(5/10 OR 9/8).
FRONT
OF
ENGINE
J948D-15
Fig. 13 Checking Coil Secondary
Resistance—Rear
Coils—8.0L
¥-10 Engine
B+ TERMINAL
TO
CENTER
COIL
FRONT
OF
ENGINE
J948D-16
Fig. 14 Checking Coil Primary
Resistance—Front
Coils—8.0L
¥-10 Engine
For removal and installation of the ICM, refer to
the Component Removal/Installation section of this
group.
ENGINE COOLANT TEMPERATURE SENSOR TEST
For an operational description, diagnosis and re
moval and installation procedures, refer to Group 14,
Fuel System.
TO LEFT
COIL
TO RIGHT
COIL
1+
TERMINAL
FRONT
OF
ENGINE
J948D-17
Fig. 15 Checking Coil Primary
Resistance—Rear
Coils—8.0L ¥-10 Engine
*
Primary Resistance: 0.53 to 0.65 ohms
* * Secondary Resistance: 10.9 to 14.7 K ohms
*
Test across the primary connector.
Refer to text for test procedures.
* * Test across the individual coil towers.
Refer to text for test procedures.
J948D-13
Fig. 16 Ignition Coil Resistance
Specifications—8.0L
¥-10 Engine
IGNITION CONTROL
MODULE (ICM)
COOLANT
RESERVE/OVERFLOW
TANK
ICM MOUNTING
BOLTS (2)
TANK
MOUNTING
BOLTS (3)
J948D-21
Fig. 17 Ignition Control Module Location—8.0L
¥-10
Engine