8B - 4
BATTERY/STARTER/GENERATOR SERVICE
BR
Fig. 11 Battery Cabies
(11) Loosely install battery holddown hardware.
Ensure that battery base is correctly positioned in
tray, then tighten holddowns to 12 N-m (100 in. lbs.).
CAUTION: B e certain that battery cables are con
nected to the correct battery terminals. Reverse po
larity can damage electrical components.
(12) Place oiled felt washer on battery positive ter
minal post.
(13) Install and tighten battery positive cable ter
minal clamp. Then install and tighten negative cable
terminal clamp. Tighten cable clamp bolts to 8.5 N-m
(75 in. lbs.).
(14) Apply a thin coating of petroleum jelly or
chassis grease to cable terminals and battery posts.