Dodge RAM TRUCK 1500 1995 Service Manual page 453

8G - 4
HORNS
B R
(7) Using a small screwdriver pry horn button
from steering wheel (Fig. 6). There are 2 locking tabs
holding each horn button to steering wheel (Fig. 7).
HQftN
CIRCUIT ^
CONNECTORS
J948G-5
Fig. 8 Horn Button Connectors
HORN REiOWE/iNSIlLl
The horn is mounted to a bracket located on the
driver's side bumper support (Fig. 9).
(1) Eaise and support vehicle.
(2) Disconnect horn(s) electrical connector(s).
(3) Remove bolt holding horn bracket to bumper
support and remove horn.
Fig. 6 Horn Button Remove
LOCKING
TABS
Fig. 9 Horn Remove/install
(4) Reverse removal procedures to install. Tighten
mounting bolt to 28 N-m (20 ft. lbs.).
J948G-4
Fig. 7 Horn Button Locking Tabs
(8) Unplug electrical connectors and remove horn
buttons from steering wheel (Fig. 8).
(9) Reverse removal procedures to install. Tighten
airbag module mounting nuts to 1.5 N-m (15 in. lbs.).