Dodge RAM TRUCK 1500 1995 Service Manual page 431

B R
Fig. 9 Unplug Electrical Connectors
REMOVE SCREWS
Fig. 10 Cluster Lens Remove/Install
J948E-14
Fig. 11 Instrument Cluster Assembly
CAUTION: Do not touch the face of a gauge or the
back of the lens with four finger. It will leave a per­
manent finger print
(4) Reverse removal procedures to install.
GAUGES REMOVE/INSTALL
(1) Remove cluster lens and mask as described in
Cluster Lens and Mask Remove/Install.
INSTRUMENT PANEL AND GAUGES 8E - 21
Fig. 12 PRND21 Housing Remove/Install
(3) Remove PRND21 mechanism from cluster.
(4) Reverse removal procedures to install.
(5) To adjust PRND21 indicator, place shift selector
in PARK position. Now adjust indicator by turning
recessed hex head screw (9/64-inch hex key wrench)
underneath cable retainer (Fig. 13).
Fig. 13 PRND21 Indicator Adjustment
CLUSTER BUL1S REMOVE/INSTALL
(1) Remove instrument cluster as described in In­
strument Cluster Remove/Install.
(2) Twist lamp socket assembly and remove from
printed circuit board.
(2) Remove required gauge screws from rear of
mounting bezel. Remove gauge from front.
(3) Reverse removal procedures to install.
PRND21 INDICATOR REMOVE/INSTALL
(1) Remove cluster assembly as described in In­
strument Cluster Remove/Install.
. (2) Remove screws attaching PRND21 mechanism
to cluster housing (Fig. 12).