Dodge RAM TRUCK 1500 1995 Service Manual page 492

I R
LAMPS 8L - 9
© ON when the high beam lamps are switched OFF.
REMOVAL
The fog lamps are serviced from the rearward side
of the front bumper.
(1) Disengage fog lamp harness connector.
(2) Remove fog lamp to bumper attaching nuts
(Fig. 6).
(3) Separate fog lamp from bumper.
INSTALLATION
(1) Position fog lamp in bumper.
(2) Install fog lamp to bumper attaching nuts.
(3) Connect fog lamp harness connector.
(4) Check for proper operation and beam align­
ment.
FOG LAMP BULB
REMOVAL
(1) Disengage fog lamp harness connector.
(2) Rotate bulb assembly counterclockwise and pull
from lamp to separate (Fig. 6).
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers
or other oily surfaces. Reduced bulb life will result.
(1) Position bulb assembly in lamp and rotate
clockwise.
(2) Connect fog lamp harness connector.
FOG LAMP
ASSEMBLY
J958L-21
Fig. 6 Fog Lamp
PARK, TURN SIGNAL AND SIDE MARKER L A i P
REMOVAL
(1) Remove screw holding park lamp to headlamp
module.
(2) Disengage clip holding park lamp to headlamp
module.
(3) Separate park lamp headlamp module.
(4) Remove park and turn signal socket from back
of lamp.
(5) Remove side marker socket from back of lamp.
(6) Separate park and turn signal lamp from vehi­
cle.
INSTALLATION
Reverse the removal procedure.
PARK AND TURN SIGNAL LAMP BULB
REMOVAL
(1) Remove park and turn signal lamp.
(2) Remove park and turn signal lamp socket from
back of lamp.
(3) Pull park and turn signal lamp bulb from
socket.
INSTALLATION
(1) Install park and turn signal lamp bulb in
socket.
(2) Install park and turn signal lamp socket into
back of lamp.
(3) Install park/turn signal lamp.
FRONT SIDE MARKER LAMP BULB
REMOVAL
(1) Remove park and turn signal lamp.
(2) Remove side marker lamp socket from back of
lamp.
(3) Pull side marker lamp bulb from socket.
INSTALLATION
(1) Install side marker lamp bulb in socket.
(2) Install side marker lamp socket into back of
lamp.
(3) Install park/turn signal lamp.
ROOF CLEARANCE LAMPS
(1) Remove screws holding clearance lamp lens to
roof panel (Fig. 7).
ROOF
J958L-18
Fig. 7 Roof Clearance Lamps
(2) Rotate socket 1/4 turn counterclockwise and