Dodge RAM TRUCK 1500 1995 Service Manual page 525

3 U - 4 CHIME/BUZZER WARNING SYSTEMS
BR
BUZZER MODULE REMOVE/INSTALL
(1) Disconnect battery negative cable.
(2) Remove 5 screws and knee blocker from lower
instrument panel (Fig. 6).
Fig. 6 Knee Blocker
(3) Remove 2 screws holding fuseblock module to
instrument panel (Fig. 7).
(4) Pull fuseblock module back far enough to gain
access to buzzer module.
(5) Pull buzzer module out of fuseblock module.
(6) Reverse removal procedures to install.
SWITCHES REMOVE/INSTALL
Service procedures for switches used in the buzzer
system can be found in the appropriate groups as fol­
lows:
• driver's door jamb switch - refer to Group 8L -
Lamps
• ignition key-in switch - refer to Group 8D - Igni­
tion Systems
• headlamp switch - refer to Group 8E - Instrument
Panel and Gauges
• driver's seat belt switch - refer to Group 23 - Body
Components.
Fig. 7 Fuseblock Module Remove/Install