BR
LAMPS
81 - 5
KEY-IN SWITCH &
MULTI-FUNCTION
Fig. 4 Steering Column Connectors
VIEW FROM TERMINAL SIDE
SWlfCH POSITION
€©NIiNtJI¥Y B E T W E E N
LOW BEAM
HIGH BEAM
OPTICAL HORN
18 A N D
19
19 A N D 20
20 AND 21
908J-5
Sensor, Headlamp Switch and the Engine Controller
(SBEC). Refer to Group 8W, Wiring Diagrams for
component location and circuit information.
^iYvj^/M
RUNNING
M-^jV [/MiLf^
S ^ M t
(1) Release hood latch an open hood.
(2) Disconnect wire connector from DRLR (Fig. 6).
(8) Remove screw holding DRLR to engine com
partment dash panel.
(4) Separate DRLR from dash panel.
INSTALLATION
Reverse the removal procedure.
Fig. 6 Daytime Running Lamp Relay (DRLR)
Fig. 5 Dimmer Switch Continuity Chart
DRL is controlled by inputs received from the Speed