Text Entry - ABB Advance Optima magnos206 Operator's Manual

Text Entry

Entering Text
Softkeys in the
Input Mode
PREV NEXT
PAGE PAGE
CAPS
EDIT
Softkeys in the
Edit Mode
BACK-
SPACE
INPUT
42/24-10 EN Rev. 9
When text, such as measurement components or user names, is to be entered an
image of the numeric keypad appears on the screen.
The following characters are shown using a total of four pages:
• Letters
A-Z and a-z
• Symbols Blank * ( ) % & : < > /
• Digits
0 to 9 . -
Each character is accessed using the key in the corresponding position on the
numeric keypad. Examples:
Letters: A L
Key: 7 -
An input line appears at the lower edge of the screen for new text to be entered or
existing text to be edited.
Text is entered and modified in two ways:
• The operator enters text in the input mode.
• The operator modifies already entered text in the edit mode.
The softkeys in the input mode have the following functions:
The PREV PAGE and NEXT PAGE keys allow the operator to move to the
previous or next keypad page.
The CAPS key allows the operator to switch between upper- and lowercase
letters.
The EDIT key allows the operator to switch into the edit mode.
The softkeys in the edit mode have the following functions:
The two arrow keys allow the operator to move the cursor left and right in the
entry line.
The operator can use the BACKSPACE key to delete characters to the left of the
cursor (as in a PC keyboard).
The INPUT key allows the operator to change to the input mode.
Chapter 6: Gas Analyzer Operation
t Blank
2 9
6-9