Table of Contents
Advertisement
Gas Analyzer Identification,
Analyzer Data Sheet
Where is the analyzer
data sheet located?
42/24-10 EN Rev. 9
continued
For the central unit and each analyzer module the analyzer data sheet contains
the following information:
• Order Number (A-No.),
• Part Number (P-No.)
• Production Date
• Production Number (F-No.)
• Serial Number
• Software Version
• Power Supply Voltage
• Measurement Range Information
• Configured Correction Functions
• Signal Input and Output Connection Drawings
• Gas Inlet and Outlet Connection Drawings
Additionally, you (and ABB Automation Service) can document on the analyzer
data sheet any maintenance work or modifications performed on your gas
analyzer.
The analyzer data sheet is located in a sleeve which is affixed
• to the inner side of the left side wall (19-inch rack-mount housing) or
• to the inner side of the door (wall-mount housing)
• The analyzer data sheet should be kept with the gas analyzer so that it is always
available for reference.
• During operation be sure to note the device- and system-specific data in the
analyzer data sheet. These data can differ from the information contained in this
operator's manual.
Chapter 2: Gas Analyzer Unpacking and Installation
2-3
Advertisement
Table of Contents
