Preface; Copyright; Disclaimer; Cybersecurity Disclaimer - ABB MicroGuard solution User Manual

4 M I C R O G U A R D ™ S O L U T I O N | M I C R O G U A R D | U M/ M I C R O G U A R D - E N R E V. B
1

Preface

Copyright

© 2021 ABB Inc . All rights reserved . No information contained in
this document may be reproduced in any form, in full or in part,
without prior written consent from ABB .

Disclaimer

This document contains product specifications and
performance statements that may be in conflict with other ABB
published literature, such as product flyers and product
catalogs . All specifications, product characteristics, and
performance statements included in this document are
suggested specifications only . In case of conflict between
product characteristics in this document and specifications in
the official ABB product catalogs, the latter takes precedence .
ABB reserves the right to make changes to the specifications of
all equipment and software, and to the contents of this
document, without obligation to notify any person or
organization of such changes . Every effort has been made to
ensure that the information contained in this document is
current and accurate . Please contact ABB-LGR if you find any
error in this document, so we can make appropriate
corrections .
Cyber Security Disclaimer
This product is designed to be connected to and to
communicate information and data via a network interface . It is
operator's sole responsibility to provide and continuously
ensure a secure connection between the product and your
network or any other network (as the case may be) . Operator
shall establish and maintain any appropriate measures (such as
but not limited to the installation of firewalls, application of
authentication measures, encryption of data, installation of
anti-virus programs, etc .) to protect the product, the network,
its system and the interface against any kind of security
breaches, unauthorized access, interference, intrusion, leakage
and/or theft of data or information . ABB, Inc . and its affiliates
are not liable for damages and/or losses related to such
security breaches, any unauthorized access, interference,
intrusion, leakage and/or theft of data or information .

Customer Support

ABB provides product support services worldwide . To receive
product support, either in or out of warranty, contact the ABB
office that serves your geographical area, or the office
indicated below:
ABB Inc . Measurement & Analytics
3400, rue Pierre-Ardouin
Quebec, (Quebec) G1P 0B2 Canada
Tel: 1 800 858 3847 (North America)
Tel: +1 418 877 2944 (Worldwide)
Fax: +1 418 877 2834
Technical Support: icos .support@ca .abb .com

Text Formats and Warning Icons

Text Formats
– Italicized text is used for emphasis in text and also to
emphasize the names of screens or text fields .
– Bold text is used to show text that you type in fields and
also button choices that you enter .
Table 1 shows and describes the icons used in this manual .
Table 1 Warning Icon Descriptions
Icon
NOTE OR
IMPORTANT!
WARNING!
Meaning
Emphasizes facts and conditions
important to analyzer operation
General Warning Icon: gives general
safety information that must be
followed to avoid hazardous
conditions .