Table of Contents
Advertisement
Status Messages,
No. Text
Runtime Error
1–21 Runtime Error 1 to 21
System Controller
101 System controller shut down
at
102 System controller starts up at
103 Installing Module:
104 Removing Module:
105 Reactivating Module:
106 A user installed module:
107 A user removed module:
108 A user replaced module:
109 A password is active! To
delete, press the <MEAS> key
on the measurement value
display.
110 System booting.
111 This system is temporarily
under remote control!
112 Display/control unit
synchronizing with analyzer.
Please wait.
113 The system time was changed
from -> to:
114 The system is saving the
changed parameters. Please
wait!
116 The Profibus Module is
mounted on the wrong slot!
The Profibus interface is not
working. Please remount the
Profibus Module on slot
X20/X21.
117 The configuration backup was
saved.
118 The configuration backup was
loaded. The system has been
restarted.
119 The system configuration
could not be loaded! This
system contains no configu-
ration now. Please enter menu
Configure/System/Save confi-
guration to load your backup
configuration. Or use SMT to
re-install your configuration.
10-8
continued
O E M F Reaction / Remark
Notify service if these status messages occur repeatedly.
For information; shows date and time
For information; shows date and time as well as warm start
or cold start
For information
For information
For information
For information
For information
For information
Not logged
Not logged
Not logged
Not logged
Not logged
x x
Chapter 10: Status Messages, Troubleshooting
Continued on next page
42/24-10 EN Rev. 9
Advertisement
Table of Contents
