Table of Contents
Advertisement
Saving the Configuration
Menu Path
Automatic Saving
Manual Saving
Backup
7-C-10
MENU → Configure → System → Save configuration
The database containing the configuration data and logbook recordings is auto-
matically saved in two configuration files.
The database is saved at the time when parameters have been changed in the
menu mode. Saving takes place either when the user deactivates an entered pass-
word by pressing the "Meas" key twice or when the gas analyzer automatically
reverts to measurement mode by "time-out".
When the gas analyzer is booting the last saved valid configuration file is loaded.
The database can also be saved manually, e.g. to buffer a large function block
configuration.
In addition to automatic and manual saving of the configuration a backup of the
current configuration can be saved in a separate memory area. It can be loaded
e.g. to reset the gas analyzer to a well-defined state.
Using the software tool "SMT light" it is possible to save a backup of the current
configuration on a separate storage medium. "SMT light" can be found on the
CD-ROM "Software Tools and Technical Documentation" which is delivered
together with the gas analyzer.
Chapter 7: Gas Analyzer Configuration
42/24-10 EN Rev. 9
Advertisement
Table of Contents
