Table of Contents
Advertisement
Digital I/O Module: Electrical Connections,
Connections of the
Standard Function
Block Applications
4-8
Status Signals / Externally Controlled Calibration:
Single Status Signals:
DO1 Failure
DO2 Maintenance Mode
DO3 Maintenance Request
DO4 External Solenoid Valve
DI1 Start Automatic Calibration
DI2 Inhibit Automatic Calibration
DI3 Adjust Zero-Point
DI4 Adjust End-Point
Measuring Range Control:
DO1 Measuring Range Feedback
DO2 Measuring Range Feedback
DO3 Measuring Range Feedback
DO4 Measuring Range Feedback
DI1 Measuring Range Switchover
DI2 Measuring Range Switchover
DI3 Measuring Range Switchover
DI4 Measuring Range Switchover
Limit Values:
DO1 Limit Value
DO2 Limit Value
DO3 Limit Value
DO4 Limit Value
DI1 Calibration Cells In / Out
DI2 Hold Current Output
DI3 Pump On / Off
DI4 External Failure
Calibration Control:
DO1 External Solenoid Valve Sample Gas
DO2 External Solenoid Valve Zero Gas
DO3 External Solenoid Valve Span Gas
DO4 External Pump On / Off
DI1 Pump On / Off
DI2 External Failure
DI3 External Failure
DI4 External Failure
Chapter 4: Electrical Connection
continued
Collective Status Signal:
Collective Status
Limit Value
Limit Value
External Solenoid Valve
Start Automatic Calibration
Inhibit Automatic Calibration
Adjust Zero-Point
Adjust End-Point
42/24-10 EN Rev. 9
Advertisement
Table of Contents
