Analyzer Modules; Gas Module - ABB Advance Optima magnos206 Operator's Manual

Analyzer Modules

Analyzer Modules
Components
Oxygen Sensor

Gas Module

Gas Module
A-1-2
• Caldos25
Thermal conductivity analyzer module
• Caldos27
Thermal conductivity analyzer module
• Limas11
Process photometer analyzer module
• LS25
Laser analyzer module
• Magnos206
Oxygen analyzer module
• Magnos27
Oxygen analyzer module
• MultiFID14
FID analyzer module
• MultiFID14 NMHC FID analyzer module
• Uras26
Infrared analyzer module
• ZO23
Trace oxygen analyzer module
Each analyzer module consists of:
• A sensor
• The associated electronics with an integral processor.
The electrochemical oxygen sensor is available as an option in combination with
an analyzer module.
The gas module is used to supply gases to the gas analyzer. A fully equipped gas
module contains the following elements:
• One gas supply pump
• One or three solenoids to control test gas supply
• One or two disposable fine-filtration elements
• One or two flow monitors
The gas module is always associated with an analyzer module. It is installed in the
same housing as the analyzer module.
Appendix 1: Gas Analyzer Overview 42/24-10 EN Rev. 9