Standard Configuration 7 - ABB Advance Optima magnos206 Operator's Manual

Standard Configuration
Standard
Configuration
Example:
Limit Value
Monitoring
Figure 7-B-1
Example:
Measurement Range
Switching/Feedback
Figure 7-B-2
7-B-2
Various applications are factory-configured. These standard configurations are
based on
• Standard input / output pin configuration
• The available sample components
Some factory-configured applications require field linking of additional function
blocks.
The limit value monitoring application (see Figure 7-B-1) consists of a factory-
configured link between the Component measurement value, Hold, Limit
monitor and Digital output function blocks.
Autocal
''
Comp.
meas.
value
'CO'
The measurement range switching/feedback application (see Figure 7-B-2)
consists of a factory-configured linkage between
• A Range control function block with several Digital input function blocks and a
Component range function block, as well as
• a Range feedback function block with the Component range function block
and several Digital output function blocks.
Digital
input
''
Digital
input
''
Chapter 7: Gas Analyzer Configuration
Hold Limit
monitor
'Alarm CO' 'Alarm CO'
Range
Comp.
control
range
''
''
Digital
output
'Alarm CO'
Digital
output
Range
feedback
''
Digital
output
''
''
42/24-10 EN Rev. 9