Configuration (Conf); Unit (Unit) - ABB D1M 20 User Manual

D1M 20 POWER METER USER MANUAL

7. Configuration (CONF)

When the user goes to the CONF section, Icon
When entering the CONF section, in order to change any configuration of the device, it is mandatory to
enter the password. It is needed to enter the password again when customer needs to re-operate after
inactivity time.
In case of wrong entering of the password for three times in a row, user will have to wait for 5 minutes
until he can enter the password once again.
In order to read only the configurations, it is possible to simultaneously press "DOWN" and "Up" buttons
while entering password.
After the user enters the password to unlock the device, icon
CONF includes the following menus:
Menu
UNIT
ISTL
I/O
ALARM
TARF
COMM
OTHR

7.1.Unit (UNIT)

UNIT includes the following sub-menus:
Menu
PWD(Password)
RST(Reset)
INFO(Information)
RTC(Real time)
BRT(Brightness)
ENSV(EnergySaving)
ALOG(AuditLog)
HOME PAGE
LED
Modify password (PWD)
PWD shares the same interface and setting way with password setting. For details, see
the first use
CONF>UNIT>PWD
Description
Settings related to the device itself
Settings related to the installation conditions
Settings related to the pulse LED
Definition of alarm conditions
Tariff Setting
Settings related to the embedded communication protocols of the D1M
version
Other settings
Description
Change the existing password
Full or partial reset of the meter
Device information
RTC and DST setting
Adjust the brightness of the display
Inactivity time interval
Review audit logs
Home page and autoscroll setting
LED parameter setting
(PWD)".
will be displayed.
will disappear.
25
"6.1.Password for