Standard Coriolismaster Configuration - ABB CoriolisMaster FCB100 Product Manual

4 FCB100, FCB400 COMMISSIONING AND PROVING | PG/CORIOLIS/PROVING-EN REV. A
Change from one to two columns

2 Standard CoriolisMaster configuration

For proving ease, configure the meter to operate in its fast response and high repeatability mode, utilizing the following
configuration settings.
1 Damping Mass: 0.1 s
2 Damping Density: .0.1 s
3 Volumeflow Q
: set to your required volume flow unit e.g. bbl/d
V
Figure 1: General settings often usable for proving and normal operations
4 Volume Totalizer: set to your required volume flow unit e.g. bbl
5 Qv
: set to your required maximum flow for your application e.g. 5000
Max
bbl/d