Troubleshooting commands
Example
AG# debug pcap capture cap1 AG/debug/pcap/capture cap1# clear-stats
debug pcap access-list
Use this command to create or modify an IP access list.
Syntax
[no] debug pcap access-list <listname>
Table 450: Variable definition
Variable
<listname>
Example
AG# debug pcap access-list acl1
debug pcap max-sessions
Use this command to configure the number of simultaneous packet capture sessions
allowed.
Syntax
[no] debug pcap max-sessions <1-10>
Example
AG# debug pcap max-sessions 6
debug pcap enable
Use this command to enable or disable all configured packet capture sessions.
Syntax
[no] debug pcap enable
Example
AG# debug pcap enable
434
Command Line Reference
The access list name.
Comments? infodev@avaya.com
Value
August 2013