Configure Ipv6 Unicast-Routing; Show Ipv6 Access-List - Avaya 2330 Reference Manual

IPv6 routing commands
<X:X::X:X/M>
<gatewayip|interface>
[<distvalue>]
Example
AG/configure# ipv6 route 3ffe:506::/32

configure ipv6 unicast-routing

Use this command to enable IPv6 unicast forwarding.
Syntax
ipv6 unicast-routing
Example
AG/configure# ipv6 unicast-routing

show ipv6 access-list

Use this command to display a list of IPv6 access lists.
Syntax
show ipv6 access-list [<access-list>]
Table 193: Variable definitions
Variable
[<access-list>]
Example
AG# show ipv6 access-list list2
198 Command Line Reference
The IPv6 destination prefix for the route to be
added.
The address or interface name of the IPv6
gateway of the route to be added.
The distance value for the route, in the range
1 to 255.
Value
Specifies the IPv6 access-list to display.
Comments? infodev@avaya.com
August 2013