Configure Qos Module Queue-Cos-Map; Configure Qos Module Rate-Monitoring - Avaya 2330 Reference Manual

Ethernet module QoS commands

configure qos module queue-cos-map

Use this command to map the output queue to a user priority value for untagged packets
egressing on that queue.
Syntax
[no] queue-cos-map <queue-no> <userpriority-value>
Table 264: Variable definitions
<queue-no>
<userpriority-value>
[no]
Example
AG/configure/qos/module# queue-cos-map 0 7

configure qos module rate-monitoring

Use this command to configure rate-monitoring parameters at the global level to specify the
sampling interval and sampling period.
Syntax
[no] rate-monitoring [sampling-interval <interval>] [sampling-period
<period>]
Table 265: Variable definitions
[sampling-interval <interval>]
[sampling-period <period>]
[no]
248 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
The output queue assigned. Valid Range:
1-8
The user priority value of the priority tagged
packet. Valid Range: 0-7
Resets the queue and user-priority mapping
to default values.
Value
Optional. Sampling interval in seconds. Valid
range: 1 – 300
Optional. Sampling period in seconds. Valid
range: 1 – 4294967295
Resets the flow-rate monitoring parameters
to default
August 2013