IPv4 routing commands
Table 176: Variable definitions
per-flow
per-packet
Example
AG/configure# ip load-balancing policy per-flow
configure ip prefix-list
Use this command to configure IP prefix lists.
Syntax
ip prefix-list {sequence-number | <listname>} {description
<description> | [seq <1-4294967295>] {deny|permit} {<A.B.C.D/M>|
any} }
Table 177: Variable definitions
sequence-number
<listname>
description <description>
{deny|permit}
{<A.B.C.D/M>|any}
Example
AG/configure# ip prefix-list mylist deny 10.0.0.0/8
configure ip route
Use this command to configure a static IP route.
186
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Per IP destination load balancing.
Round robin load balancing. Not effective on
Ethernet module cards.
Value
Include/exclude sequence numbers in
NVGEN.
The name of the prefix list.
Up to 80 characters describing this prefix-
list.
Reject or forward packets.
Configure by IP address or any prefix
match.
August 2013