Ethernet module QoS commands
Table 271: Variable definitions
[<policy-name>]
[class <class-name>]
[detail]
Example
AG# show qos module policy-map policy1
show qos module service-policy
Use this command to display the policy map attached with the interface.
Syntax
show qos module service-policy [<if-name>]
Table 272: Variable definitions
[<if-name>]
Example
AG# show qos module service-policy ethernet6/12
show qos module system
Use this command to display the system level Module QoS configuration.
252
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Optional. Name of the policy-map. Valid
range: Up to 19 characters. If policy-name is
not specified, the QoS configuration of all the
policy maps in the system will be displayed.
Optional. Name of the class-map. Valid
range: Up to 19 characters If class-name is
not specified, the QoS configuration of all the
class maps within the policy map will be
displayed
Optional. Used for detailed display of the
configuration User may opt to display the
detailed information using the "detail"
parameter
Value
Optional. Name of the interface. If if-name is
not specified, all the policy map and interface
mappings in the system will be displayed.
August 2013