Configure Qos Module Policy-Map Class-Map Police Srtcm; Configure Qos Module Policy-Map Class-Map Police Trtcm - Avaya 2330 Reference Manual

Ethernet module QoS commands

configure qos module policy-map class-map police srtcm

Use this command to configure srTCM to configure single-rate policing for the class. By default,
after you configure srTCM properties, the configuration is automatically enabled for the
class.
Syntax
srtcm <cir-value> [cbs <cbs-value>] [ebs <ebs-value>]
Table 261: Variable definitions
<cir-value>
[cbs <cbs-value>]
[ebs <ebs-value>]
[no]
Example
AG/configure/qos/module/policy-map map1/class-map class1/police#
srtcm 400 cbs 3000 ebs 6000

configure qos module policy-map class-map police trtcm

Syntax
trtcm <cir-value> <pir-value> [cbs <cbs-value>] [pbs <pbs-value>]
Table 262: Variable definitions
<cir-value>
246 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
The committed information rate. Valid
Range: 3Kbps - 10000000 Kbps
Optional. The committed burst size in Kbits.
The valid range corresponding to CIR should
be >= (1 * CIR Kbps) and <= (5* CIR Kbps).
The value must be at least as large as the
largest possible packet.
Optional. The excess burst size in Kbits. The
valid range corresponding to CIR should be
>= (1 * CIR Kbps) and <= (5* CIR Kbps). The
value must be at least as large as the largest
possible packet.
Removes srTCM configuration for the class
Value
The committed information rate. Valid
Range: 3 Kbps - 10000000 Kbps.
August 2013