Configure Qos Module Congestion-Profile Drop-Curve; Configure Qos Module Congestion-Profile Exponential-Weighting-Constant - Avaya 2330 Reference Manual

Ethernet module QoS commands

configure qos module congestion-profile drop-curve

Use this command to configure the congestion avoidance parameters for one of the four
congestion profiles.
Syntax
[no] drop-curve <queue-id> <drop-precedence-value> [maxthreshold
<max-threshold-value>] [min-threshold <minthreshold- value>] [drop-
prob-denominator <mpd>]
Table 241: Variable definitions
<queue-id>
<drop-precedence-value>
[maxthreshold <max-threshold-value>]
[min-threshold <minthreshold- value>]
[drop-prob-denominator <mpd>]
[no]
Example
AG/configure/qos/module/ congestion-profile 1# drop-curve 8 high
maxthreshold drop-prob-denominator 2
configure qos module congestion-profile exponential-
weighting-constant
Use this command to configure the exponential weighting factor (EWF) constant for the
specified congestion profile.
Syntax
[no] exponential-weighting-constant <queue-id> <ewf-value>
234 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Identifier for the queue. Valid ranges: 1-8
Drop precedence value. Valid ranges: {low,
min, high}
Optional. Maximum threshold value for
WRED. Valid range: 1 - 4000
Optional. Minimum threshold value for
WRED. Valid range: 1 - 4000
Optional. Mark probability denominator.
Valid range: 1 - 10
Disables accounting for the class.
August 2013