Configure Snmp-Server Enable Traps Snmp; Configure Snmp-Server Enable Traps Sntp; Configure Snmp-Server Enable Traps System - Avaya 2330 Reference Manual

[trap_temp temperature]
[trap_power power]
Example
AG/configure/snmp-server/enable/traps# environment trap_fan fan

configure snmp-server enable traps snmp

Use this command to enable or disable traps for SNMP authentication failure.
Syntax
[no] snmp [trap_auth auth_fail]
Table 122: Variable definitions
[trap_auth auth_fail]
Example
AG/configure/snmp-server/enable/traps# snmp trap_auth auth_fail

configure snmp-server enable traps sntp

Use this command to enable or disable client traps for the simple network timing protocol.
Syntax
[no] sntp
Example
AG/configure/snmp-server/enable/traps# sntp

configure snmp-server enable traps system

Use this command to enable or disable traps for reporting system shutdowns, user logins and
logouts, and user login failures.
Command Line Reference
Variable
Variable
configure snmp-server enable traps snmp
Value
Enables temperature level change trap.
Enables power supply status change trap.
Value
Enables authentication failure trap
August 2013 135