Spanning-Tree Priority; Show Spanning-Tree - Avaya 2330 Reference Manual
Advanced gateway
Hide thumbs
Also See for 2330:
- Manual (176 pages) ,
- Regulatory information (72 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
MSTP commands
<value>
Example
AG/configure/interface/ethernet (6/1)/spanning-tree# path-cost 1000
spanning-tree priority
The lower the port priority, the greater the chance that the port is selected for traffic
transmission. Use this command to configure the priority for a port.
Syntax
[no] priority <value>
Table 107: Variable definitions
Variable
[no]
<value>
Example
AG/configure/interface/ethernet (6/1)/spanning-tree# priority 100
show spanning-tree
Use these commands to show information about the state and role of all ports in Common
Spanning Tree.
Syntax
show spanning-tree
show spanning-tree [detail]
show spanning-tree [interface <interface id>]
show spanning-tree [mstp instance]
show spanning-tree [mstp instance vlan]
show spanning-tree [mstp instance <instance id>]
122
Command Line Reference
Specifies the path cost. The default value is
auto-detect. Valid values are 1 to
200000000.
Value
Restores the default link priority (128).
Specifies the link priority. The default value
is 128. Valid values are 0 to 240.
Comments? infodev@avaya.com
August 2013
Advertisement
Table of Contents
