Configure Snmp-Server Trap-Source - Avaya 2330 Reference Manual

SNMP commands
Syntax
target-params <target params name> {<security name> | <username>}
<version> <security-level>
Table 133: Variable definitions
<target params name>
<security name>
<user name>
<version>
<security-level>
Example
AG/configure/snmp-server# target-params Param1 nortel v3 authNoPriv

configure snmp-server trap-source

Use this command to configure SNMP trap messages so that they are sent to a specific IP
address. Otherwise, traps are sent to the system default address.
Syntax
trap-source <A.B.C.D>
Table 134: Variable definitions
<A.B.C.D>
142 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the name of the target parameter.
Specifies the security name for SNMP v1 and
v2c configuration.
Specifies the name of the user for SNMP
v3.
Specifies the SNMP version. Values include:
• v1
• v2c
• v3
Specifies the level of security for access.
Values include:
• noAuth
• authNoPriv
• authPriv
Value
Specifies the IP address for SNMP trap
messages
August 2013