Chapter 7: ISDN configuration commands
configure interface bundle isdn activate
Use this command to activate ISDN with user data.
If you change any of the ISDN properties (except callingnum, callednum, idle-timeout, call-
back, and connect-delay), you must deactivate ISDN (using the no activate command) and
then reactivate ISDN for the changes to be applied.
Syntax
activate
Example
AG/configure/interface/bundle pri1/isdn# activate
configure interface bundle isdn map
Use this command to override the default ISDN type and plan generated by the AG with custom
values.
Syntax
[no] map <address> <plan> <type>
Table 58: Variable definitions
Variable
[no]
<address>
Command Line Reference
Value
Reverts to the default ISDN type and plan.
Specifies either the calling number or the
called number. This parameter can be a
regular expression also for pattern matching.
It specifies that the ISDN type and plan will
be overridden for addresses that match the
regular expression.
August 2013
81