Configure Voice-Port Echo-Cancel Coverage; Configure Voice-Port Echo-Cancel Enable - Avaya 2330 Reference Manual

Table 378: Variable definitions
g711ulaw
g711alaw
[no]
Example
AG/configure/voice-port (2/1)# compand-type g711ulaw

configure voice-port echo-cancel coverage

Use this command to adjust the size of the echo canceller (EC). If echo-cancel is enabled, this
information is passed as a call parameter during media setup
By default, the echo canceller is set to 64 ms.
Syntax
[no] echo-cancel coverage {8 | 16 | 24 | 32 | 48 | 64 | 128}
Table 379: Variable definitions
{8 | 16 | 24 | 32 | 48 | 64 | 128}
[no]
Example
AG/configure/voice-port (2/1)# echo-cancel coverage 24

configure voice-port echo-cancel enable

Use this command to enable the cancellation of voice that is sent out an interface and returned
to the same interface. To disable echo cancellation, use the no form of this command
By default, the G.168 echo canceller (EC) is enabled with the echo suppressor turned off.
Syntax
[no] echo-cancel enable
Command Line Reference
Variable
Variable
configure voice-port echo-cancel coverage
Value
Specifies the North American u-law ITU-T
PCM encoding standard.
Specifies the European a-law ITU-T PCM
encoding standard.
Disables the compand type.
Value
Specifies the echo canceller size in ms.
Resets this command to the default value (64
ms).
August 2013 349