Dsp Configuration Commands; Clear Voice Dsp Statistics; Configure Voice-Port Comfort-Noise; Configure Voice-Port Compand-Type - Avaya 2330 Reference Manual

SIP Media Gateway commands

DSP configuration commands

clear voice dsp statistics

Use this command to clear DSP statistics.
Syntax
clear voice dsp statistics
Example
AG# clear voice dsp statistics

configure voice-port comfort-noise

Use this command to generate background noise to fill silent gaps during calls if voice activity
detection (VAD) is activated. To provide silence when the remote party is not speaking and
VAD is enabled at the remote end of the connection, use the no form of this command.
By default, no background noise is generated.
Syntax
[no] comfort-noise
Example
AG/configure/voice-port (2/1)# comfort-noise

configure voice-port compand-type

Use this command to specify the companding standard used to convert between analog and
digital signals in pulse code modulation (PCM) systems.
Default value is u-law for T1 digital.
Syntax
[no] compand-type {g711ulaw | g711alaw}
348 Command Line Reference
Comments? infodev@avaya.com
August 2013