<country-name>
Example
AG/configure/module/e1 (1/1)#cas-custom category 2
The following table describes the G.411 Group II forward signals.
Table 346: G. 411 Group II forward signals
Combination
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
The following table describes the Q.411 Group A backward signal codes.
Command Line Reference
Variable
Signal
designation
II-1
Subscriber without priority
II-2
Subscriber with priority
II-3
Maintenance equipment
II-4
Spare
II-5
Operator
II-6
Data transmission
II-7
Subscriber (or operator
without forward transfer
facility)
II-8
Data transmission
II-9
Subscriber with priority
II-10
Operator with forward
transfer facility
II-11
These are spare signals for
national use.
II-12
II-13
II-14
II-15
Value
Specifies the local country, region or
corporation that is used with R2 signaling.
The name can be one of the following:
BRAZIL, CHINA, GENERIC, KOREA,
MEXICO, SINGAPORE. Default is R2_ITU
GENERIC.
Definition
These signals are used for
national working only.
These signals are used for
international working.
E1 R2 configuration commands
Comments
August 2013
321