Configure Module E1 Description; Configure Module E1 Enable - Avaya 2330 Reference Manual

T1/E1 module configuration commands
<contact-info>
Example
AG/configure/module/e1 (3/1)# contactInfo James Smythe

configure module e1 description

Use this command to enter a description for the E1 interface.
Syntax
description <port-description>
Table 36: Variable definitions
Variable
port-description
Example
AG/configure/module/e1 (3/1)# description Connected to branch fas2/0

configure module e1 enable

Use this command to enable the E1 interface to allow the link to transmit and receive data.
Syntax
[no] enable
Table 37: Variable definitions
[no]
Example
AG/configure/module/e1 (3/1)# enable
66 Command Line Reference
Variable
Comments? infodev@avaya.com
person to contact for information regarding
the E1 link.
Value
Describes the E1 interface.
Value
Takes the E1 link out of service. This action
sends an all-ones Alarm Indication Signal
(AIS) to the far end and places the link out of
service.
August 2013