Chapter 15: Bridge configuration
configure bridge priority
Use this command to set the bridge priority for the common instance. The lower the priority
value, the greater the chance that the bridge becomes the root bridge.
Syntax
priority <value>
Table 111: Variable definitions
Variable
value
Example
AG# priority 5
configure maximum aging time
Use this command to set the maximum aging time for a bridge.
Syntax
max-age < max-age value>
Table 112: Variable definitions
Variable
max-age value
Command Line Reference
commands
Value
bridge priority. The default value is 32768.
Valid values are 0 to 61440, and are
increments of 4096.
Value
maximum time, expressed in seconds, to
listen for the root bridge. The default value is
20 seconds. Valid values are 6 to 40
seconds.
August 2013
127