Bridge configuration commands
Example
AG# max-age 36
configure forward time delay
Use this command to set the time after which (if this bridge is the root bridge) each port changes
its state to learning and forwarding.
Syntax
forward-time <forward delay value>
Table 113: Variable definitions
Variable
forward delay value
Example
AG# forward-time 5
configure static MAC address
Use this command to to statically configure a bridge entry to forward or discard matching
frames.
Syntax
mac address <mac addr> {forward|discard} <interface> vlan <vid>
Table 114: Variable definitions
Variable
<mac addr>
<forward|discard>
<interface>
<vid>
128
Command Line Reference
Value
forwarding time delay, expressed in
seconds. The default value is 15 seconds.
Valid values are 4 to 30 seconds.
Value
MAC address, expressed in
HHHH.HHHH.HHHH format.
action to take when matching frames enter
the specified interface.
interface on which the frame enters the
unit.
VLAN ID. Valid values are 1 to 4094.
Comments? infodev@avaya.com
August 2013