Configure Dial-Peer Voice Pots Port - Avaya 2330 Reference Manual

Example
In the following example, all digits in the destination pattern of a POTS dial peer are forwarded:
AG/configure> dial-peer voice pots 1 SR /configure/dial-peer/voice/
pots 1> destination-pattern 8... AG/configure/dial-peer/voice/pots 1>
forward-digits all
In the following example, four of the digits in the destination pattern of a POTS dial peer are
forwarded:
AG/configure> dial-peer voice pots 1 AG/configure/dial-peer/voice/
pots 1> destination-pattern 555.... AG/configure/dial-peer/voice/pots
1> forward-digits 4
In the following example, the extra right-justified digits that exceed the length of the destination
pattern of a POTS dial peer are forwarded:
AG/configure> dial-peer voice pots 1 AG /configure/dial-peer/voice/
pots 1> destination-pattern 555.... AG /configure/dial-peer/voice/
pots 1> forward-digits extra

configure dial-peer voice pots port

Use this command to associate a POTS dial peer with a specific voice port.
This command is used for:
• calls that come from a telephony interface to select an incoming dial peer
• calls that come from the VoIP network to match a port with the selected outgoing dial peer
Syntax
[no] port <slot/[<subslot/]port[:<d-channel>]>
Table 364: Variable definitions
<slot/[<subslot/]port[:<d-channel>]>
[no]
Example
AG/configure/dial-peer/voice/pots 10# port 4/1
Command Line Reference
Variable
configure dial-peer voice pots port
Value
Port number of the voice card to be
configured. The <d-channel> value is only
required when ISDN PRI is configured on a
T1 port (<d-channel> = 23).
Cancels the dial-peer association with the
port.
August 2013 337