Configure Voice Service Voip Fax Rate; Configure Voice Service Voip Modem Passthrough - Avaya 2330 Reference Manual

SIP Media Gateway commands
[no]
Example
AG/configure/voice/service/voip# fax protocol pass-through g711ulaw

configure voice service voip fax rate

Use this command to establish the global fax rate.
The default fax rate is 9600.
Syntax
[no] fax rate {2400 | 4800 | 7200 | 9600 | 12000 | 14400| voice}
Table 395: Variable definitions
{2400 | 4800 | 7200 | 9600 | 12000 | 14400|
voice}
[no]
Example
AG/configure/voice/service/voip# fax rate voice

configure voice service voip modem passthrough

Use this command to enable modem pass-through over VoIP for all dial peers.
By default, modem pass-through is disabled.
Syntax
[no] modem passthrough {g711ulaw | g711alaw}
360 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
• none: no fax pass-through is attempted.
• pass-through-g711ulaw: uses the G.711 u-
law codec.
• pass-through-g711alaw: uses the G.711 a-
law codec.
Returns to the default fax protocol value:
none.
Value
Specifies the baud rate.
Resets the fax rate to the default value:
9600.
August 2013