SIP Media Gateway commands
Example
AG/configure#system logging syslog module voip-cdr sys9 warn
configure voice call call-limit
Use this command to limit the bandwidth used by limiting the number of simultaneous calls on
the AG2330.
By default, no call limit is configured.
Syntax
[no] call-limit <call-limit>
Table 333: Variable definitions
<call-limit>
[no]
Example
AG/configure/voice/call# call-limit 10
configure voice class custom-cptone
Use this command to create custom tone classes by associating a class with dualtones.
Syntax
[no] [ringback-tone <dualtone>] [busy-tone <dualtone>] [congestion-
tone <dualtone>]
Table 334: Variable definitions
ringback-tone <dualtone>
312
Command Line Reference
Variable
Variable
Variable
Comments? infodev@avaya.com
Value
• debug: all messages
• none: no messages
Value
Specifies the call-limit. Valid range: 1 - 128.
Sets the call-limit to the default value: no
limit.
Value
Specifies a dualtone as the ringback tone.
August 2013